#2892: ATMEGA2560-16au

R255.15

High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller - This is effectively an Arduino Mega 2560 shrunk to the size of a coin! We have a special test socket available (QFP100-0.5) that will help you easily use and test the chip so that you do not have to worry about the small pin sizes.

• Advanced RISC Architecture – 135 Powerful Instructions – Most Single Clock Cycle Execution – 32 × 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16MHz – On-Chip 2-cycle Multiplier

• High Endurance Non-volatile Memory Segments – 64K/128K/256KBytes of In-System Self-Programmable Flash – 4Kbytes EEPROM – 8Kbytes Internal SRAM – Write/Erase Cycles:10,000 Flash/100,000 EEPROM – Data retention: 20 years at 85C/ 100 years at 25C – Optional Boot Code Section with Independent Lock Bits

• In-System Programming by On-chip Boot Program

• True Read-While-Write Operation – Programming Lock for Software Security

• Endurance: Up to 64Kbytes Optional External Memory Space

• Atmel® QTouch® library support – Capacitive touch buttons, sliders and wheels – QTouch and QMatrix acquisition – Up to 64 sense channels

ATmega2560-16AU is a microcontroller (MCU) integrated circuit (IC) that is part of the ATmega2560 family of MCUs. It is made by Atmel, a company that was acquired by Microchip Technology Inc. in 2016.

The ATmega2560-16AU is based on the AVR architecture, which is a RISC (Reduced Instruction Set Computing) architecture designed for high performance and low power consumption. It has a 16-bit RISC processor core, which means that it can execute instructions 16 bits at a time. The -16AU version of the ATmega2560 has 256 kilobytes (KB) of flash memory, 8 KB of SRAM (Static Random Access Memory), and 4 KB of EEPROM (Electrically Erasable Programmable Read-Only Memory).

The ATmega2560-16AU is a versatile MCU that can be used in a wide range of applications, including automotive, industrial, and consumer electronics. It has a large number of input/output (I/O) pins, multiple timers, and a built-in analog-to-digital converter (ADC), which makes it suitable for a variety of tasks. It can also be programmed using a variety of different programming languages, such as C, C++, and assembly.