From design to manufacturing, we support every stage, including software development, hardware, and CAD design. Our expertise spans scalable IoT solutions, embedded software & microcontroller programming, networks & servers, smart device integration, production automation, hardware-software integration, mobile app development and web services. Whether you need custom IoT systems, connected devices, or specialized development services, we bring your ideas to life!
Leobot Electronics South Africa - Electronic Component Supplier & Development Service Provider
Leobot Electronics Online Shop
R113.40
1. Description:
The temperature sensor test temperature,and the voltage comparison to detect the temperature. When the temperature is greater than the set point, the DO outputs are low.
2. Feature:
1>.+/- 1% waterproof thermistor probe, and the line length is 50cm 2>. The on-board processor has high accuracy, fast response and good quality 3>. The board adjustable potentiometer has high sensitivity.
3. Parameter:
NO.
Parameter
Value
1
size
30*15*8 mm
2
Voltage
3.3-12VDC
3
Current
Operating < 20ma; output <30ma
4
Interface
+ - DO(Digital quantity) AO(Analog quantity)
5
Purpose
Test temperature
4. Instructions
1>. "+" connected to the positive pole "-" connected to the negative pole. Then the power is connected, "P" the power indicator lighting up. The module work properly.
2>. The blue potentiometer is adjusted clockwise / counterclockwise, respectively, which can increase / decrease the sensitivity of the probe.
3>. The potentiometer is adjusted clockwise to "S". When the output indicator is on, it indicates that the range of adjustment has exceeded the test threshold; while adjusting the counter to the limit when you cannot adjust it. Adjustment can not exceed the threshold, otherwise it can not be used properly. Voltage regulation is only used for the "DO" port and is not associated with the "AO" output.
4>. The "AO" output can be detected directly through the AD port of the MCU.
N/A
Arduino Automated Plant Water ProjectA simple but practical Arduino project to automatically water your plants, showing the usage of a 7-Segment Display, a Soild Moisture Sensor, a Temperature Sensor and a Relay.
Arduino IntroductionIntroducing you to the awesome Arduino!
Simple Arduino RC Car/Robot A guide to construct your own Arduino-based 2 Wheel-Drive Robot
Arduino F.A.Q Arduino Frequently Asked Questions & Answers
LM393 Light Detection Sensor Module (4-pin LM393 LDR Digital & Analog)
R43.53
IR Infrared Obstacle Avoidance Sensor Module
R25.80
Snow & Rain Detection Sensor Module
R43.00
Speed Sensor/Tacho Sensor (Slot-Type Optocoupler)
TCRT5000 Infrared Line Tracking & Tracing Sensor Module
R34.40
Reed Sensor Module (MagSwitch)
R16.44
3-Axis Compass Magnetometer Module (GY-273 QMC5883L)
R105.84
ADXL345 3-Axis Accelerometer Module
Temperature Sensor Module (KY-001 3pin DS18B20)
R68.80
IR Receiver & Flame Detection Module (KY-026)
R15.15
5kg Electronic Scale Sensor (Load Cell 5 to 10V, YZC-131)
R158.76
Soil Moisture (Humidity) Sensor Module
Rotary Encoder Module (KY-040)
Microphone Audio & Sound Detection Sensor Module (KY-037)
Digital Hall Magnetic Sensor Module (KY-035 3pin, 3144233)
R28.38
Get notified when new stock arrives! Simply provide your email address:
Want more stock than we have on-hand? Let us import this product in bulk for you! Bulk Direct Import