#529: Laser Beam Combiner Cube Prism (405nm~ 450nm Blue Laser)

R158.76

A laser beam combiner cube prism is a type of optical component that is used to combine two or more laser beams into a single beam. It consists of a cube-shaped piece of glass or other transparent material that is coated with a special reflective coating on its internal surfaces. The coating is designed to reflect the specific wavelengths of light that are being used, while allowing other wavelengths to pass through.

The laser beam combiner cube prism works by reflecting the incoming laser beams off of the coated surfaces at precise angles, causing them to combine and exit the prism as a single beam. The precise angles and coatings used can vary depending on the specific application and the wavelengths of the laser beams being used.

In the case of a laser beam combiner cube prism designed for use with blue lasers (405nm~450nm), the coating would be optimized to reflect blue light in the specified wavelength range while allowing other wavelengths to pass through. Such a prism could be used, for example, to combine multiple blue lasers into a single beam for use in scientific experiments or industrial processes.

Designed for 405nm~450nm High power laser beam Combining.

Lower Power Loss: by turning the diodes beam as it goes into the cube you can get more power;  if you go over 5W you may need to add cooling to ensure the Prism does not shatter.

Note:
Please handle the Prism Mirror carefully to avoid any scratch or dirty on the surface.